H20 Primer And Liquid Mask

£26.99
sold out

1L Tin

For a professional finish on windows and doors the H20 primer and liquid mask means you don’t have to worry about getting paint on the glass. It can be used over knots if the knots have been sanded.

Fast to apply with a brush, roller or sprayer

Primer and peelable mask in one

Easy to remove and it is ideal for glass/ timber doors

TECHNICAL DETAILS – 

Theoretical coverage : 2m squared per litre at 200ЧM DFT

Recommended DFT : 200ЧM DFT

Usual number of coats : 2

Water Resistance : Resists Water Splash. Prolonged water contact may soften and remove product.

Weather Resistance : Do not leave unprotected for more than 3 months, externally

Colour : White when liquid, dries clear

Dry time (minimum) :  Touch dry in 30 min to 1 hour @ 25°C, depending on RH

Full cure : 24 hours @ 25°C, 40% RH

Recoat time (minimum) : 1 hour @ 25°C

Primer required : No

Not to be used on any plastic or PVC surfaces. Always test on intended surface/substrate before use.

SETTINGS FOR SPRAYING H20 

AIRLESS:

  • Tip Size – 517

  • Pump Pressure – 2000 PSI

 

HVLP :

  • Needle Number- 1.8MM Tip Size

  • Air Number – Turbo Control at 7

  • Set Fluid Outlet To Max

  • Dilution Required – The Less The Better – Start With 5% Clean Water

Watch our video

https://www.youtube.com/watch?v=tT_EE7iSQSE

Add To Cart

1L Tin

For a professional finish on windows and doors the H20 primer and liquid mask means you don’t have to worry about getting paint on the glass. It can be used over knots if the knots have been sanded.

Fast to apply with a brush, roller or sprayer

Primer and peelable mask in one

Easy to remove and it is ideal for glass/ timber doors

TECHNICAL DETAILS – 

Theoretical coverage : 2m squared per litre at 200ЧM DFT

Recommended DFT : 200ЧM DFT

Usual number of coats : 2

Water Resistance : Resists Water Splash. Prolonged water contact may soften and remove product.

Weather Resistance : Do not leave unprotected for more than 3 months, externally

Colour : White when liquid, dries clear

Dry time (minimum) :  Touch dry in 30 min to 1 hour @ 25°C, depending on RH

Full cure : 24 hours @ 25°C, 40% RH

Recoat time (minimum) : 1 hour @ 25°C

Primer required : No

Not to be used on any plastic or PVC surfaces. Always test on intended surface/substrate before use.

SETTINGS FOR SPRAYING H20 

AIRLESS:

  • Tip Size – 517

  • Pump Pressure – 2000 PSI

 

HVLP :

  • Needle Number- 1.8MM Tip Size

  • Air Number – Turbo Control at 7

  • Set Fluid Outlet To Max

  • Dilution Required – The Less The Better – Start With 5% Clean Water

Watch our video

https://www.youtube.com/watch?v=tT_EE7iSQSE

1L Tin

For a professional finish on windows and doors the H20 primer and liquid mask means you don’t have to worry about getting paint on the glass. It can be used over knots if the knots have been sanded.

Fast to apply with a brush, roller or sprayer

Primer and peelable mask in one

Easy to remove and it is ideal for glass/ timber doors

TECHNICAL DETAILS – 

Theoretical coverage : 2m squared per litre at 200ЧM DFT

Recommended DFT : 200ЧM DFT

Usual number of coats : 2

Water Resistance : Resists Water Splash. Prolonged water contact may soften and remove product.

Weather Resistance : Do not leave unprotected for more than 3 months, externally

Colour : White when liquid, dries clear

Dry time (minimum) :  Touch dry in 30 min to 1 hour @ 25°C, depending on RH

Full cure : 24 hours @ 25°C, 40% RH

Recoat time (minimum) : 1 hour @ 25°C

Primer required : No

Not to be used on any plastic or PVC surfaces. Always test on intended surface/substrate before use.

SETTINGS FOR SPRAYING H20 

AIRLESS:

  • Tip Size – 517

  • Pump Pressure – 2000 PSI

 

HVLP :

  • Needle Number- 1.8MM Tip Size

  • Air Number – Turbo Control at 7

  • Set Fluid Outlet To Max

  • Dilution Required – The Less The Better – Start With 5% Clean Water

Watch our video

https://www.youtube.com/watch?v=tT_EE7iSQSE